Complete Solarpex AC/DC Submersible Pump Kit – 1500W, 2HP, 168m Maximum Head
Original price was: KSh127,000.KSh110,000Current price is: KSh110,000.
- 1500W / 2HP rated power.
- AC/DC operation for solar and compatible AC power.
- 168m maximum pumping head.
- 5m³/h maximum flow, equivalent to 5,000 litres per hour.
- Centrifugal pumping system with PPO impellers.
- 144V rated pump voltage.
- 1¼-inch outlet connection.
- 2,250W specified solar array requirement.
- Four solar panels included.
- Pump controller included.
- Free lowering rope and float switch.
- Submersible cable splicing kit included.
- 5m solar-panel-to-controller cable included
| Weight | 60 kg |
|---|
The Complete Solarpex 1500W AC/DC Solar Submersible Pump Kit combines a powerful borehole pump with four solar panels, a controller and essential installation accessories. Designed for suitable clean-water applications, it provides a practical pumping solution for homes, farms, livestock watering and water storage systems.
Rated at 1500W (2HP), this pump has a maximum head of 168 metres and a maximum flow rate of 5m³/h, equivalent to 5,000 litres per hour. Its AC/DC capability offers solar-powered operation and the option of a compatible AC supply through the controller.
Solar and AC Power Flexibility
Use available sunshine to pump water during the day, with the flexibility of a compatible AC source when required. The supplied controller manages the power connection and provides an operating interface with a display and control buttons.
The pump’s rated voltage is 144V. Solar panel wiring and AC connections must match the controller’s specified input requirements.
168m Maximum Head
With a maximum head of 168m, the Solarpex pump is suited to applications requiring substantial water lift, provided the required flow falls within its operating range.
Total pumping head includes the vertical lift from the pumping water level to the delivery point, pipe friction losses and any required outlet pressure. The 168m rating is a maximum head limit, rather than a guaranteed borehole installation depth.
Maximum Flow of 5,000 Litres per Hour
The 5m³/h maximum flow supports water transfer and tank-filling applications. Actual delivery depends on the working head, pipe diameter, delivery distance and available power.
Maximum flow and maximum head are separate limits. The pump will not deliver 5,000 litres per hour at a head of 168m. Pump selection should be based on the required flow at your site’s total pumping head.
Centrifugal Design with PPO Impellers
The pump uses a centrifugal system with PPO impellers to move water through its pumping stages towards the outlet. Its submersible design allows it to operate below the water surface in a suitable borehole or well.
A 1¼-inch outlet provides the connection for the delivery pipe. Pipework should be selected to suit the system’s pressure, flow and delivery distance.
Four Solar Panels Included
The package comes with four solar panels, bringing the pump and its solar supply components together in one kit. The specified solar array power requirement is 2,250W.
The supplied panels must be configured within the controller’s voltage and current limits. Water output during solar operation varies with sunlight, shading, panel positioning and pumping head.
Free Rope and Float Switch
A free pump lowering rope assists with positioning and securing the pump during installation. The pump must be supported appropriately and should never be lifted or suspended by its electrical cable.
The free float switch supports water-level control when correctly connected and configured, such as stopping pumping when a receiving tank reaches its set level.
Cable Splicing Kit and Solar Connection Cable
The included submersible cable splicing kit is used to join the pump lead to a suitable submersible extension cable. Correct installation and sealing are essential for an underwater cable joint.
You also receive 5 metres of cable from the solar panels to the controller. This cable serves the solar connection and does not replace the submersible power cable needed between the controller and pump.
