Solarpex 4SDS5-800W AC/DC Solar Submersible Water Pump – 80m Head 1.0HP
Original price was: KSh87,000.KSh46,000Current price is: KSh46,000.
- Model: 4SDS5-800W.
- AC/DC operation: Solar power with compatible AC supply flexibility.
- Rated power: 800W, listed as 1.0HP.
- Maximum flow: 5m³/h or 5,000 litres per hour.
- Maximum head: 80 metres.
- Rated voltage: 72V.
- Pump design: Centrifugal with PPO impellers.
- Outlet size: 1¼ inches.
- Specified solar array power: 1,200W.
- Submersible design: Operates below the water surface.
- Controller shown: Provides the system’s power and operating interface.
The Solarpex 4SDS5-800W AC/DC Submersible Pump provides a practical water pumping solution for homes, farms, boreholes and wells. Rated at 800W and listed as 1.0HP, this pump combines solar-powered operation with the flexibility of a compatible AC power supply.
With a maximum flow rate of 5m³/h—equivalent to 5,000 litres per hour—and a maximum head of 80 metres, it is suitable for transferring water to storage tanks, supplying livestock and supporting farm water requirements when correctly matched to the installation.
AC/DC Power Flexibility
The Solarpex pump supports solar DC operation and compatible AC operation through its controller. This allows you to use available sunshine for pumping and an appropriate AC supply when an alternative power source is needed.
The pump has a rated voltage of 72V. Solar panels and AC connections must be configured to match the controller’s specified input requirements.
Maximum Flow of 5,000 Litres per Hour
The pump delivers a maximum flow of 5m³/h, making it useful for water transfer and tank-filling applications. Actual output depends on the pumping height, pipe length, pipe diameter, available power and installation conditions.
Maximum flow and maximum head are separate performance limits. The pump will not deliver 5,000 litres per hour at an 80m head. Select the pump using the flow required at your installation’s total pumping head.
Maximum Head of 80 Metres
The 80m maximum head describes the pump’s maximum water-lifting capability. When assessing your installation, consider the vertical lift from the pumping water level to the delivery point, friction losses along the pipe and any pressure required at the outlet.
This rating should not be treated as a guaranteed installation depth. The working water level and complete delivery route determine the load on the pump.
Centrifugal Pump with PPO Impellers
The pump uses a centrifugal design with PPO impellers to move water through the pumping stages and towards the outlet. It is intended for suitable clean-water applications in boreholes, wells and other appropriate submerged installations.
1¼-Inch Outlet Connection
A 1.25-inch outlet provides the connection point for the delivery pipe. The final pipe selection should account for the required flow, distance and pumping pressure to help limit friction losses.
Recommended 1,200W Solar Array
The specified solar array power is 1,200W. Panel selection must meet both the required array power and the controller’s operating voltage and current limits.
Solar water output varies with sunlight intensity, shading, panel positioning and pumping head. Correct panel configuration is essential for dependable operation.
Suitable Applications
- Borehole and well water supply.
- Filling domestic and farm storage tanks.
- Livestock watering.
- Transferring water to elevated tanks.
- Supplying irrigation storage systems.
- Water supply for rural properties with suitable solar exposure.
