Total 1100W Angle grinder TG110125565

Total 1100W Angle grinder TG110125565 – Powerful, Versatile and Precise Grinding Performance

The Total 1100W Angle grinder TG110125565 is a powerful corded electric tool designed to provide reliable performance across a wide range of grinding, cutting, polishing, deburring, and surface preparation applications. Equipped with a 1100W input power and a variable no-load speed ranging from 5,000 to 12,000 RPM, this angle grinder gives users the power and speed flexibility needed for different tasks and materials. Its 125mm disc diameter provides a practical balance between cutting capability and maneuverability, while the M14 spindle thread allows compatibility with suitable accessories. The inclusion of an auxiliary handle further improves handling and control during operation.

• 220–240V~50/60Hz Input Voltage for Reliable Operation

The Total 1100W Angle grinder TG110125565 operates on a 220–240V~50/60Hz electrical supply, making it suitable for compatible standard mains power systems. Its corded design allows the grinder to draw continuous electrical power while connected to an appropriate outlet, eliminating the need to rely on rechargeable batteries during operation. This can be particularly useful for extended grinding or cutting sessions where consistent power availability is important. Users should always ensure that the available electrical supply corresponds with the stated voltage and frequency requirements before operating the tool.

• 1100W Input Power for Demanding Workshop Tasks

With an input power rating of 1100W, the Total 1100W Angle grinder TG110125565 provides a substantial power level for a variety of grinding and cutting applications. The motor is designed to deliver the power required for suitable work involving metal and other compatible materials. This makes the grinder useful for tasks where material needs to be ground, cut, deburred, or prepared before further processing. The 1100W rating gives the tool a practical power specification for workshops, fabrication environments, construction sites, and maintenance operations where dependable electric grinding equipment is required.

• 5,000–12,000 RPM Variable No-Load Speed

The Total 1100W Angle grinder TG110125565 features a variable no-load speed range of 5,000–12,000 RPM. Variable-speed operation provides users with greater flexibility when working on different applications because the speed can be adjusted according to the task and compatible accessory being used. Lower speeds can be useful for applications where controlled operation is preferred, while higher speeds can provide efficient performance for suitable grinding and finishing work. Users should always select a speed appropriate for the installed disc or accessory and follow its manufacturer’s maximum speed rating.

• 125mm Disc Diameter for Versatile Cutting and Grinding

The grinder is designed to accommodate a 125mm disc diameter, making the Total 1100W Angle grinder TG110125565 suitable for a broad range of common grinding and cutting applications. A 125mm disc provides a useful working size that combines practical material removal capability with manageable tool dimensions. Depending on the selected compatible disc, users can perform tasks such as grinding, cutting, deburring, and surface preparation. The disc should always be selected according to the intended application and must be compatible with the grinder’s operating specifications.

• M14 Spindle Thread for Compatible Accessories

The Total 1100W Angle grinder TG110125565 features an M14 spindle thread, an important specification for fitting compatible grinding, cutting, polishing, and other suitable accessories. The spindle interface allows users to install accessories designed for the appropriate M14 connection. Correct accessory selection is essential for safe and effective operation, and users should verify that the disc or accessory matches the grinder’s spindle specification, disc size, and permitted operating speed. This standard spindle specification contributes to the tool’s versatility by allowing it to work with a suitable range of accessories.

• Variable-Speed Control for Better Application Flexibility

Variable-speed control is a key feature of the Total 1100W Angle grinder TG110125565, allowing users to adjust the operating speed to suit different applications. Not every grinding or finishing task requires the same speed, and having speed adjustment available can provide greater control over the working process. For example, certain polishing or finishing applications may benefit from a more controlled speed, while appropriate grinding operations can make use of higher speeds. The ability to vary speed gives users greater flexibility compared with a grinder limited to a single operating speed.

• Auxiliary Handle Included for Improved Handling

The Total 1100W Angle grinder TG110125565 comes with one auxiliary handle, providing an additional gripping point for the operator. An auxiliary handle can help improve control when guiding the grinder across a workpiece, particularly during tasks that require steady positioning. It also provides users with an alternative holding position depending on the application and working angle. Proper use of the auxiliary handle can contribute to more controlled handling during grinding, cutting, deburring, and other suitable operations.

• Corded Electric Power Source for Continuous Work

The corded electric configuration of the Total 1100W Angle grinder TG110125565 provides continuous power when the tool is connected to a compatible mains supply. Unlike battery-powered grinders, a corded tool does not require battery replacement or recharging during operation. This can be advantageous for workshops and fixed work areas where mains electricity is readily available and longer periods of operation are expected. The user can concentrate on the work without having to monitor battery charge levels, provided the electrical supply remains available.

• Suitable for Grinding Applications

The Total 1100W Angle grinder TG110125565 is designed for grinding applications using an appropriate compatible grinding disc. Grinding can be used to remove excess material, smooth suitable metal surfaces, clean weld areas, and prepare components for subsequent fabrication or finishing processes. The grinder’s 1100W power rating and variable-speed capability provide a useful combination for these types of tasks. The correct grinding accessory should always be selected according to the material, application, and grinder specifications.

• Useful for Cutting Suitable Materials

With an appropriate cutting disc installed, the Total 1100W Angle grinder TG110125565 can be used for suitable cutting applications. Angle grinders are commonly used in fabrication and maintenance work to cut compatible metal components and other materials when the correct disc is selected. The 125mm disc size provides a practical configuration for general cutting tasks, while the corded 1100W power system supports continuous operation. Users must always use a cutting disc specifically designed for the intended material and follow the accessory manufacturer’s operating instructions.

• Suitable for Polishing and Surface Finishing

The Total 1100W Angle grinder TG110125565 can also be used for suitable polishing and finishing applications when fitted with the correct compatible accessory. Its variable-speed capability can be particularly useful for finishing tasks where controlled rotational speed is preferred. Polishing can help improve the appearance and surface condition of appropriate materials, while the grinder’s adjustable speed provides greater flexibility than a fixed-speed design. The accessory must always be appropriate for both the intended material and the grinder’s operating speed.

• Effective Tool for Deburring and Surface Preparation

The Total 1100W Angle grinder TG110125565 is suitable for deburring and surface preparation tasks when used with the appropriate accessory. Deburring involves removing unwanted sharp edges or excess material from suitable components, while surface preparation can help prepare a workpiece for painting, welding, coating, or further fabrication. These applications are common in workshops, fabrication environments, and maintenance operations. The grinder’s variable speed allows the user to select an appropriate operating speed for the specific accessory and task.

• Compact Design for Workshop, Construction and Maintenance Work

The Total 1100W Angle grinder TG110125565 features a compact angle-grinder design intended to make the tool practical for workshop, construction, fabrication, and maintenance tasks. A compact configuration can make it easier to maneuver around suitable workpieces and access areas where larger equipment may be less convenient. Its combination of manageable dimensions, 125mm disc capacity, and auxiliary handle makes it suitable for a variety of everyday grinding and finishing operations. The corded format also makes it particularly useful in work areas with convenient access to mains electricity.

• Practical Tool for Fabrication and Metalworking Applications

The Total 1100W Angle grinder TG110125565 can serve as a useful addition to fabrication and metalworking equipment. Grinding welds, cutting suitable metal components, removing burrs, preparing surfaces, and carrying out finishing work are common tasks in fabrication environments. Its 1100W input power and variable speed provide useful characteristics for these applications, while the 125mm disc diameter keeps the tool suitable for general-purpose work. With the correct accessories and operating procedures, the grinder can support a wide range of appropriate fabrication activities.

• Versatile Performance for Everyday Maintenance Tasks

The Total 1100W Angle grinder TG110125565 is also well suited to general maintenance work where grinding, cutting, deburring, or surface preparation may be required. Maintenance tasks can vary considerably, so the ability to use suitable accessories and adjust the operating speed provides useful flexibility. Its corded power source is practical for workshops and maintenance areas with compatible electrical outlets. The auxiliary handle further supports controlled handling when carrying out appropriate maintenance operations.

• Powerful and Flexible Angle Grinder for Professional and Workshop Use

The Total 1100W Angle grinder TG110125565 combines 1100W input power, a 5,000–12,000 RPM variable-speed range, 125mm disc capacity, and an M14 spindle thread to create a versatile corded grinding tool. Its included auxiliary handle provides an additional point of control, while the compact design makes it practical for workshops, construction environments, fabrication areas, and maintenance tasks. The combination of adjustable speed and compatibility with suitable accessories allows the grinder to handle a variety of applications rather than being limited to one specific task.

• Reliable 1100W Grinding Solution with Versatile Speed and Practical Control

The Total 1100W Angle grinder TG110125565 offers a practical combination of power, speed flexibility, accessory compatibility, and handling control for users who need a dependable electric angle grinder. Its 220–240V~50/60Hz power requirement and 1100W input rating provide a strong foundation for continuous corded operation, while the 5,000–12,000 RPM variable-speed range gives users greater flexibility for different applications. The 125mm disc diameter and M14 spindle thread support the use of suitable accessories for grinding, cutting, polishing, deburring, and surface preparation. With the included auxiliary handle and compact design, the Total 1100W Angle grinder TG110125565 is a useful choice for workshops, construction projects, fabrication work, and general maintenance where controlled and efficient material processing is required.

Click to view more different prices