Total 115mm Ultrathin diamond disc TAC061151

Total 115mm Ultrathin diamond disc TAC061151 – Precise, Durable and Efficient Cutting Performance

The Total 115mm Ultrathin diamond disc TAC061151 is designed to provide precise and efficient cutting performance across a variety of hard construction and masonry materials. Its ultrathin design, practical 115mm diameter, and 22.2mm bore make it a useful accessory for compatible angle grinder applications. Designed for cutting materials such as marble, granite, bricks, stone, and concrete, this disc is suitable for users who require a versatile cutting solution for construction, renovation, masonry, and stonework tasks. With a 10mm blade width, 1.6mm blade thickness, 0.9mm matrix thickness, and 75Cr1 material specification, it combines carefully defined dimensions for demanding cutting work.

• Size: 115mm (4-1/2″) × 22.2mm for Compatible Grinder Applications

The Total 115mm Ultrathin diamond disc TAC061151 has a disc size of 115mm, also referred to as 4-1/2 inches, with a 22.2mm bore size. This compact disc diameter makes it suitable for compatible angle grinders designed to accept 115mm cutting discs. The 22.2mm centre bore provides the specified mounting dimension for appropriate grinder spindle and flange arrangements. Using the correct disc size is important for proper installation and safe operation, making it essential to confirm compatibility with the angle grinder before use. The practical 115mm format is useful for controlled cutting in construction, workshop, renovation, and general masonry applications.

• Blade Width: 10mm for Effective Cutting Coverage

The disc features a blade width of 10mm, providing the specified cutting edge dimension for its intended applications. Blade width is an important part of the overall disc design because it contributes to the cutting structure and the area available for performing cutting work. The 10mm blade width supports the disc’s ability to cut through suitable hard materials while maintaining a compact overall profile. When used correctly on compatible equipment, the disc can provide a practical cutting solution for marble, granite, bricks, stone, concrete, and other appropriate materials within its intended application range.

• Blade Thickness: 1.6mm for an Ultrathin Cutting Profile

With a blade thickness of 1.6mm, the Total 115mm Ultrathin diamond disc TAC061151 features an ultrathin cutting profile. A thinner disc profile can help produce a relatively narrow cut compared with thicker cutting accessories, while also reducing the amount of material removed along the cutting path. This makes the disc suitable for applications where controlled and precise cutting is important. The 1.6mm blade thickness contributes to the overall ultrathin design and makes the disc a useful option for cutting suitable masonry and construction materials. Proper cutting technique and compatible equipment should always be used to achieve effective results.

• Matrix Thickness: 0.9mm for a Carefully Designed Disc Structure

The Total 115mm Ultrathin diamond disc TAC061151 has a matrix thickness of 0.9mm. The matrix forms part of the structural design of the disc and provides the supporting body for the cutting section. This carefully specified thickness contributes to the disc’s ultrathin construction while providing the structural characteristics required for its intended use. The combination of a 0.9mm matrix thickness and 1.6mm blade thickness creates a compact disc profile suitable for precise cutting tasks. Users should always inspect the disc before use and avoid using a damaged, cracked, or excessively worn cutting accessory.

• Material: 75Cr1 for Practical Blade Construction

The Total 115mm Ultrathin diamond disc TAC061151 is specified with 75Cr1 material, which forms part of its blade construction. Material selection is an important consideration in cutting accessories because the blade body must provide an appropriate supporting structure during operation. The 75Cr1 specification contributes to the overall design of the disc and complements its defined dimensions, including the 115mm diameter and 0.9mm matrix thickness. Together, these features create a cutting accessory designed for suitable masonry and construction applications where a compact ultrathin disc is required.

• Ultrathin Diamond Disc for Precise and Efficient Cutting

A key feature of the Total 115mm Ultrathin diamond disc TAC061151 is its ultrathin design, which is intended to support precise and efficient cutting. The narrow cutting profile makes it useful for applications where a controlled cut is required through suitable hard materials. Whether working with stone, bricks, concrete, marble, or granite, an appropriately selected ultrathin cutting disc can help users achieve accurate cutting results when operated correctly. The compact 115mm size also allows the disc to be used with compatible portable angle grinders, making it practical for both professional and general cutting tasks.

• Suitable for Lithium-Ion Angle Grinders

The Total 115mm Ultrathin diamond disc TAC061151 is suitable for compatible Lithium-ion angle grinders. Cordless angle grinders provide greater freedom of movement because they can be used without requiring a power cable during operation. When the disc is correctly matched with a compatible grinder, it can be useful for cutting tasks in workshops, construction areas, outdoor work locations, and other environments where mobility is important. Users should always confirm the grinder’s supported disc diameter, bore compatibility, rated speed, and other operating requirements before fitting the disc.

• Designed for Cutting Marble, Granite, Bricks, Stone and Concrete

Versatility is another important feature of the Total 115mm Ultrathin diamond disc TAC061151. It is designed for cutting marble, granite, bricks, stone, and concrete, making it suitable for a broad range of compatible hard-material applications. This allows users to consider one cutting accessory for different types of masonry and stonework projects. From cutting bricks for construction to trimming stone materials during renovation, the disc provides a practical solution for suitable tasks. Actual cutting performance can vary depending on the material properties, thickness, working conditions, and the compatible angle grinder being used.

• Ideal for Construction and General Building Applications

The Total 115mm Ultrathin diamond disc TAC061151 is suitable for construction-related cutting tasks involving compatible materials. Construction work often requires the cutting and shaping of bricks, concrete products, stone, and other hard materials. Its 115mm size makes it practical for use with compatible portable angle grinders, allowing users to perform cutting work in different locations around a job site. The ultrathin profile supports controlled cutting, while the disc’s material compatibility makes it useful for a variety of building and installation tasks.

• Suitable for Masonry Work and Material Preparation

For masonry work, accurate cutting of building materials can be important for achieving the required dimensions and fit. The Total 115mm Ultrathin diamond disc TAC061151 can be used for suitable cutting applications involving bricks, stone, and concrete. Its compact size provides practical handling when fitted to a compatible angle grinder, allowing users to perform trimming and cutting work where appropriate. This makes the disc useful for masons, contractors, technicians, and other users involved in building and repair activities.

• Useful for Renovation and Remodeling Projects

Renovation projects can involve a wide variety of cutting tasks, particularly when modifying walls, flooring, stone surfaces, or other construction materials. The Total 115mm Ultrathin diamond disc TAC061151 provides a practical cutting option for compatible renovation applications. Its ability to cut marble, granite, bricks, stone, and concrete makes it useful when working with different materials found in residential, commercial, or general renovation environments. The compact 115mm disc size can also be useful when controlled cutting and easier manoeuvrability are required.

• Practical for Stonework and Hard-Material Cutting

Stonework frequently requires cutting accessories capable of handling hard materials while providing controlled results. The Total 115mm Ultrathin diamond disc TAC061151 is designed for cutting suitable stone materials, including granite and marble. Its ultrathin profile makes it a useful option where a relatively narrow cutting path is desired. When installed correctly on a compatible angle grinder, the disc can support various stonework applications, including cutting, trimming, sizing, and preparation of suitable materials.

• Durable Blade Construction for Demanding Cutting Tasks

The Total 115mm Ultrathin diamond disc TAC061151 features a blade construction designed for demanding cutting applications. Its specified 75Cr1 material, 0.9mm matrix thickness, and 1.6mm blade thickness work together as part of its overall structure. These characteristics provide a carefully defined disc design for cutting suitable hard materials. Proper use, correct mounting, and appropriate operating conditions are important for maintaining cutting performance and helping prevent unnecessary damage to the disc. Users should also follow the safety instructions provided for both the cutting accessory and the angle grinder.

• Packed by Color Box for Convenient Storage and Handling

The Total 115mm Ultrathin diamond disc TAC061151 is packed in a color box for convenient handling and storage. Proper packaging helps keep the cutting disc protected before installation and makes it easier to identify and organize among other tools and accessories. The color box also provides a practical presentation for storage in workshops, tool collections, hardware stores, and other working environments. Users should store the disc in a dry and appropriate location and inspect it before fitting it to a compatible grinder.

• A Practical and Precise Cutting Accessory for Construction, Masonry and Stonework

The Total 115mm Ultrathin diamond disc TAC061151 provides a practical combination of compact size, ultrathin construction, and compatibility with a range of hard materials. Its 115mm diameter, 22.2mm bore, 10mm blade width, 1.6mm blade thickness, and 0.9mm matrix thickness create a carefully specified profile for controlled cutting applications. Designed for compatible Lithium-ion angle grinders, it can be used for cutting marble, granite, bricks, stone, and concrete in suitable construction, masonry, renovation, and stonework environments. Its durable blade construction and practical packaging further add to its usefulness.

Click to view more different prices