Total 2 Inch Gasoline water pump TP3206

Total 2 Inch Gasoline water pump TP3206 – Powerful, Reliable and Efficient Water Transfer Solution

The Total 2 Inch Gasoline water pump TP3206 is a powerful and practical water transfer solution designed for demanding pumping applications in agriculture, irrigation, drainage, construction, and general water management. Powered by a 7.0HP gasoline engine with a 208cc displacement, this pump provides the independent performance needed in locations where electrical power may not be readily available. Its 50mm (2-inch) suction and discharge ports provide practical connections for compatible hoses, while the maximum flow rate of 550 L/min allows substantial quantities of water to be moved efficiently. With a maximum head lift of 32m and maximum suction head of 8m, the pump is suitable for a range of water-transfer situations requiring dependable suction and discharge performance.

• Suction & Discharge Port Diameter – 50mm (2 Inches) for Efficient Water Connection

The Total 2 Inch Gasoline water pump TP3206 features 50mm, or 2-inch, suction and discharge ports. These appropriately sized inlet and outlet connections allow the pump to be paired with compatible 2-inch hoses and fittings for water-transfer applications. A practical port diameter is important because it provides a suitable pathway for water entering and leaving the pump. The 2-inch configuration makes this model suitable for applications where users need to move significant quantities of water rather than relying on a small-diameter pumping setup. Properly matched hoses and connections can help users make effective use of the pump’s specified flow capacity.

• Maximum Flow Rate – 550 L/min for High-Volume Water Transfer

With a maximum flow rate of 550 litres per minute, the Total 2 Inch Gasoline water pump TP3206 is designed to move a substantial volume of water within a relatively short period under suitable operating conditions. This high flow capacity can be particularly useful when transferring water between tanks, supplying irrigation systems, draining suitable areas, or moving water around agricultural and construction sites. A high maximum flow rate can reduce the time required for certain water-transfer tasks, improving productivity where large volumes need to be moved. Actual flow performance can vary depending on factors such as hose configuration, elevation, water source, and operating conditions.

• Maximum Head Lift – 32m for Elevated Water Transfer

The pump provides a maximum head lift of 32m, allowing it to push water upward through a suitable pumping system to a considerable elevation under appropriate conditions. Head lift is an important consideration when water needs to be transferred from a lower location to a higher point. The 32m specification gives users a useful indication of the pump’s maximum lifting capability. This makes the machine suitable for various applications involving elevated water delivery, such as irrigation, water transfer, and other suitable pumping tasks where differences in elevation need to be considered.

• Maximum Suction Head – 8m for Practical Water Source Access

The Total 2 Inch Gasoline water pump TP3206 has a maximum suction head of 8m, indicating its specified maximum vertical suction capability under suitable conditions. This feature is useful when the water source is positioned below the pump and water must first be drawn upward before being discharged. The 8m suction specification provides flexibility for applications involving tanks, reservoirs, shallow water sources, drainage points, and other suitable locations. Correct hose installation and proper pump setup are important for achieving effective suction performance.

• Engine Power – 7.0HP Gasoline Engine for Independent Pumping

A 7.0HP gasoline engine powers the Total 2 Inch Gasoline water pump TP3206, providing the mechanical power required to drive the water pump. Gasoline engine operation makes the unit useful in locations where mains electricity is unavailable or inconvenient. This independence from an electrical outlet is particularly valuable for agricultural fields, remote work areas, construction sites, drainage locations, and emergency water-transfer situations. The 7.0HP engine provides a substantial power source for operating the pump and supporting its intended water-transfer performance.

• Engine Displacement – 208cc for Robust Mechanical Operation

The gasoline engine features a 208cc displacement, providing the engine configuration behind the pump’s mechanical operation. Engine displacement is an important specification when evaluating gasoline-powered equipment because it relates to the engine’s cylinder capacity and overall design. Combined with the 7.0HP power rating, the 208cc engine provides a practical power unit for driving the pump during suitable water-transfer tasks. Its gasoline-powered configuration also allows the machine to operate independently of grid electricity, making it suitable for outdoor and remote applications.

• Fuel Tank Capacity – 3.6L for Convenient Fuel Storage

The Total 2 Inch Gasoline water pump TP3206 is equipped with a 3.6L fuel tank, providing a dedicated reservoir for gasoline during operation. The fuel tank allows the engine to carry its fuel supply with the machine, supporting convenient use in outdoor environments. A properly filled fuel tank means the pump can be positioned where it is required without needing an immediate external fuel connection. Actual operating duration will depend on factors such as engine load, operating speed, fuel consumption, and pumping conditions, so users should monitor fuel levels during extended applications.

• Starting System – Recoil Start for Straightforward Engine Starting

The pump uses a recoil starting system, providing a straightforward manual method for starting its gasoline engine. Recoil starting is a common feature on portable gasoline-powered equipment and does not require a mains electrical connection for engine ignition. This complements the pump’s independent gasoline-powered design, allowing it to be used in locations where electrical power may not be available. Following the manufacturer’s recommended starting procedure and appropriate operating precautions can help users start and operate the pump correctly.

• Pump Type – Gasoline-Powered Water Pump for Efficient Water Transfer

The Total 2 Inch Gasoline water pump TP3206 is a gasoline-powered water pump designed specifically for transferring suitable water from one location to another. Its gasoline engine provides the mechanical energy needed to operate the pump, while the 2-inch ports provide practical connections for compatible hoses. This configuration makes the machine useful for applications where portability and independence from electrical power are important. It can be positioned near an appropriate water source and connected to a suitable discharge line for the intended pumping task.

• Ideal For – Irrigation, Drainage, Agriculture and Construction Applications

The Total 2 Inch Gasoline water pump TP3206 is suitable for a broad range of water-transfer applications. In agriculture, it can support suitable irrigation and water movement tasks. For drainage applications, it can assist with transferring water away from appropriate areas. Construction sites can also benefit from gasoline-powered pumping equipment where water needs to be moved and mains electricity is not readily accessible. It can additionally be used for general water transfer between suitable locations, provided the application remains within the pump’s operating capabilities and specifications.

• Port Size – 2-Inch Inlet and Outlet for Compatible Hose Connections

The 2-inch inlet and outlet configuration provides a practical setup for connecting compatible hoses to the Total 2 Inch Gasoline water pump TP3206. Matching the hose size to the pump’s ports helps create an appropriate water-transfer system. The inlet is used to draw water toward the pump, while the discharge port directs pumped water toward the desired destination. Proper connections, suitable hose selection, and secure fittings are important for effective operation and to minimize unwanted leaks during use.

• Portable Gasoline Operation – Useful Where Electrical Power Is Limited

One of the main advantages of the Total 2 Inch Gasoline water pump TP3206 is its gasoline-powered operation. Because the pump is driven by its own 7.0HP engine, it does not depend on a nearby electrical outlet to perform its basic pumping function. This makes it especially useful for outdoor applications, agricultural fields, construction sites, drainage areas, and remote locations. Users can transport the pump to a suitable location and operate it using an appropriate gasoline supply, providing greater flexibility compared with electrically powered pumps that depend on mains access.

• Packaging – Carton Box for Practical Transportation and Storage

The pump is packed in a carton box, providing a practical packaging solution for transportation, handling, and storage. The carton packaging helps keep the equipment protected during movement from one location to another and provides a convenient way to store the pump when it is not in use. Proper storage is important for gasoline-powered machinery, particularly when the equipment will be kept for extended periods between applications. Users should follow appropriate storage and maintenance practices recommended for gasoline engines and water pumps.

• Powerful Water Movement with High Flow Capacity and Useful Lifting Performance

The Total 2 Inch Gasoline water pump TP3206 combines a 7.0HP gasoline engine, 550 L/min maximum flow rate, 32m maximum head lift, and 8m maximum suction head to provide a capable water-transfer solution. These specifications make it suitable for users who need to move substantial quantities of water across appropriate distances and elevations. The 2-inch port configuration complements the high flow capability by providing suitable connections for compatible hoses. Together, these features make the pump practical for demanding water-transfer applications in agriculture, irrigation, drainage, construction, and other outdoor environments.

• A Reliable Gasoline-Powered Water Transfer Partner for Agriculture, Irrigation, Drainage and Construction

The Total 2 Inch Gasoline water pump TP3206 offers a strong combination of power, flow capacity, suction capability, and practical portability for users who require dependable water movement. Its 7.0HP, 208cc gasoline engine provides independent mechanical power, while the 550 L/min maximum flow rate supports high-volume water transfer under suitable conditions. The 32m maximum head lift and 8m maximum suction head provide useful capabilities for applications involving elevation and water sources below the pump. Its 3.6L fuel tank, recoil starting system, and 2-inch suction and discharge ports add practical functionality for outdoor operation.

Click to view more different prices