Total 3 Inch Gasoline water pump TP3306

TP3306

Total 3 Inch Gasoline water pump TP3306 – Powerful, High-Flow and Reliable Water Transfer Solution

The Total 3 Inch Gasoline water pump TP3306 is a powerful and practical water-transfer machine designed for applications that require high-volume pumping without depending on mains electricity. Powered by a 7.0HP gasoline engine with 208cc displacement, this pump combines strong mechanical performance with a large 3-inch water connection for efficient movement of substantial quantities of water. It delivers a maximum flow rate of 1,000 L/min, a maximum head lift of 32m, and a maximum suction head of 8m, making it suitable for a wide range of irrigation, drainage, agricultural, construction, and general water-transfer applications.

• Suction & Discharge Port Diameter – 80mm (3 Inches) for High-Volume Water Movement

The Total 3 Inch Gasoline water pump TP3306 features 80mm, or 3-inch, suction and discharge ports. The larger port diameter provides a suitable pathway for moving substantial quantities of water through compatible hoses and fittings. Compared with smaller pump connections, a 3-inch configuration is particularly appropriate for applications where high water flow is a priority. The suction port draws water toward the pump, while the discharge port directs the pumped water toward the required destination. Using compatible hoses and secure fittings helps users make effective use of the pump’s specified flow capacity.

• Maximum Flow Rate – 1,000 L/min for High-Volume Water Transfer

With a maximum flow rate of 1,000 litres per minute, the Total 3 Inch Gasoline water pump TP3306 is designed for applications where moving large volumes of water efficiently is important. This substantial flow capacity can be useful for irrigation, drainage, agricultural water transfer, construction-site pumping, and other suitable applications. A high flow rate can help reduce the time required to transfer water between suitable locations, improving efficiency during demanding tasks. Actual flow performance will depend on factors such as hose length, elevation, water source, fittings, operating conditions, and the overall pumping system.

• Maximum Head Lift – 32m for Elevated Water Transfer

The pump provides a maximum head lift of 32m, giving it the ability to push water toward an elevated destination under suitable operating conditions. Head lift is particularly important when water needs to be transferred from a lower point to a higher location. The 32m specification makes the pump suitable for applications involving differences in elevation, including certain irrigation, agricultural, construction, and water-transfer tasks. Users should consider the actual height, hose arrangement, friction losses, and other system conditions when planning an installation, as maximum head ratings represent specified operating limits rather than guaranteed flow at every height.

• Maximum Suction Head – 8m for Practical Water Source Access

The Total 3 Inch Gasoline water pump TP3306 has a maximum suction head of 8m, allowing it to draw water from a source positioned below the pump within the specified suction capability. This is useful for applications where the pump cannot be positioned directly beside or at the same level as the water source. Suitable water sources may include tanks, reservoirs, drainage points, and other appropriate locations. Proper hose installation, secure connections, correct priming where required, and suitable positioning are important for achieving effective suction performance.

• Engine Power – 7.0HP Gasoline Engine for Independent Pumping

A 7.0HP gasoline engine provides the mechanical power for the Total 3 Inch Gasoline water pump TP3306. This gives the pump an independent power source that does not require connection to an electrical outlet during normal operation. Such independence is particularly valuable in agricultural fields, remote locations, construction sites, drainage areas, and other outdoor environments where mains electricity may not be readily available. The 7.0HP engine provides the driving force required for the pump to deliver its specified water-transfer performance under suitable conditions.

• Engine Displacement – 208cc for Robust Power Generation

The gasoline engine has a displacement of 208cc, providing the engine capacity behind the pump’s operation. Combined with its 7.0HP power rating, the 208cc engine is designed to provide the mechanical output needed to drive the pump. Gasoline engine operation makes this equipment particularly useful for mobile pumping duties because the machine can be taken directly to a suitable work area without depending on a fixed electrical supply. This configuration supports the pump’s role as an outdoor water-transfer solution for agriculture, irrigation, drainage, construction, and general pumping applications.

• Fuel Tank Capacity – 3.6L for Convenient Fuel Storage

The Total 3 Inch Gasoline water pump TP3306 is equipped with a 3.6L fuel tank, giving the gasoline engine an integrated fuel storage capacity. The built-in tank allows the machine to carry its fuel supply while being transported and operated at the required location. This is particularly convenient for outdoor work where access to a fuel source may not be immediately available. Actual operating duration will depend on factors such as engine load, operating conditions, fuel consumption, and usage, so the fuel level should be monitored during longer pumping sessions.

• Starting System – Recoil Start for Straightforward Operation

The pump uses a recoil starting system to start its gasoline engine. Recoil starting provides a straightforward manual starting method and complements the machine’s independent gasoline-powered configuration. Since the engine does not depend on mains electricity for starting, the pump can be deployed in remote or outdoor locations where electrical connections may not be available. Users should follow the recommended starting procedure and appropriate safety practices when operating the gasoline engine.

• Pump Type – Gasoline-Powered Solution for Efficient Water Transfer

The Total 3 Inch Gasoline water pump TP3306 is a gasoline-powered water pump designed to transfer suitable water from one location to another. Its independent gasoline engine drives the pumping mechanism, while the 3-inch suction and discharge ports provide connections for compatible hoses. This configuration makes the pump well suited to users who require substantial water movement combined with the flexibility of gasoline-powered operation. It can be positioned near a suitable water source and connected to an appropriate discharge system according to the requirements of the application.

• Ideal For – Irrigation, Drainage, Agriculture and Construction

The Total 3 Inch Gasoline water pump TP3306 is suitable for a variety of demanding water-management applications. In agriculture, it can support suitable water-transfer and irrigation activities. For drainage work, its high flow capacity can help move substantial amounts of water away from appropriate areas. Construction sites can also benefit from its gasoline-powered operation, especially where electrical power is unavailable or inconvenient. The pump can additionally be used for general water-transfer duties where its flow, suction, and head specifications meet the requirements of the task.

• Port Size – 3-Inch Inlet and Outlet for Compatible Hose Connections

The 3-inch inlet and outlet provide a practical connection system for compatible hoses. The larger diameter is well suited to the pump’s high-flow design and allows the machine to handle substantial water movement when paired with an appropriate hose system. Securely connecting the suction hose to the inlet and the discharge hose to the outlet is important for effective operation. Users should select hoses, fittings, clamps, and other components that are suitable for the intended application and compatible with the 3-inch pump connections.

• High-Flow Capability – Designed for Moving Large Quantities of Water Efficiently

With its 1,000 L/min maximum flow rate and 3-inch ports, the Total 3 Inch Gasoline water pump TP3306 is particularly useful for high-volume water-transfer requirements. Its configuration allows users to move substantial quantities of water during appropriate applications, helping improve productivity when compared with smaller-capacity pumping equipment. This makes it a practical choice for larger irrigation tasks, drainage requirements, agricultural water movement, and construction-related pumping. The actual flow achieved will depend on the complete pumping setup and operating conditions.

• Gasoline-Powered Operation – Flexible Performance Away from Electrical Outlets

The gasoline-powered design gives the Total 3 Inch Gasoline water pump TP3306 an important advantage for outdoor and remote applications. Because it uses a 7.0HP gasoline engine rather than relying on mains electricity, users can take the pump to locations where electrical infrastructure is limited or unavailable. This makes it particularly useful for farms, fields, construction sites, drainage areas, and other temporary work locations. Its portable operating concept allows the pump to serve different water-transfer requirements as needed, provided it is used within its specified capabilities.

• Packaging – Carton Box for Practical Transportation and Storage

The pump is packed in a carton box, providing a convenient packaging solution for transportation and storage. The carton helps keep the machine protected during handling and movement before installation or use. It also provides a practical storage option when the pump is not required for active water-transfer duties. Proper storage of gasoline-powered equipment is important, and users should follow appropriate recommendations for fuel management, engine care, and general pump maintenance during periods of non-use.

• Powerful Combination of Flow, Head Lift, Suction Capability and Engine Performance

The Total 3 Inch Gasoline water pump TP3306 combines a 7.0HP gasoline engine, 208cc displacement, 1,000 L/min maximum flow rate, 32m maximum head lift, and 8m maximum suction head into one practical pumping solution. These specifications give the machine the capability required for a variety of high-volume water-transfer tasks. Its 3-inch connections complement the high flow capacity, while the gasoline engine provides the independence required for many outdoor applications. Together, these features make it a useful machine for users who need substantial water movement without depending on a fixed electrical power source.

• A Powerful and Dependable Water Transfer Partner for Agriculture, Irrigation, Drainage and Construction

The Total 3 Inch Gasoline water pump TP3306 provides a versatile combination of high water-flow capability, useful lifting performance, strong engine power, and independent gasoline operation. Its 1,000 L/min maximum flow rate is suitable for high-volume water movement, while the 32m maximum head lift and 8m maximum suction head provide useful capabilities for applications involving elevation and water sources below the pump. The 7.0HP, 208cc gasoline engine supplies the mechanical power required for pumping, while the 3.6L fuel tank and recoil starting system support practical outdoor operation. The 80mm (3-inch) suction and discharge ports provide suitable connections for compatible hoses, making the machine well suited to irrigation, drainage, agriculture, construction, and general water-transfer duties.

Click to view more different prices