Total 4 Inch 750W Deep well pump TWP57506

Total 4 Inch 750W Deep well pump TWP57506 – Powerful, Efficient and Reliable Water Pumping Solution

Total 4 Inch 750W Deep well pump TWP57506 is a reliable deep-well submersible pumping solution designed for efficient water extraction and transfer from suitable underground water sources. With a 750W (1.0HP) rated motor, an impressive maximum head of 80m, and a maximum flow of 6.7m³/h, this pump is designed to provide dependable performance for applications requiring effective vertical water lifting. Its 4-inch well pump body, 10-stage impeller configuration, copper wire motor, and brass outlet provide a practical combination for deep-well water pumping. It is suitable for domestic water supply, irrigation, agricultural applications, and general water transfer where the specified pumping capacity meets the requirements of the installation.

• 220–240V~50Hz Input Voltage for Convenient Electrical Operation

Total 4 Inch 750W Deep well pump TWP57506 operates on an input voltage of 220–240V~50Hz. This specification allows the pump to be connected to a compatible electrical supply within the stated voltage range. The 50Hz operating frequency makes the unit suitable for electrical systems that use this common supply frequency. Having a clearly defined voltage requirement also makes it easier to plan the electrical side of the installation before putting the pump into operation. Users should ensure that the available power source corresponds with the pump’s rated requirements and that suitable electrical protection is provided as part of the installation.

• 750W (1.0HP) Rated Power for Strong Pumping Performance

The pump has a rated power of 750W, equivalent to 1.0HP, giving it a useful level of power for deep-well water pumping applications. The motor supplies the energy required to drive the pump’s 10-stage impeller system and move water through the delivery pipe. A 1.0HP rating provides a practical balance between motor power and pumping capability for applications requiring water to be lifted from underground sources. The 750W power specification is also useful when planning the electrical supply and determining whether the pump is appropriately matched to the intended water system.

• 80m Maximum Head for High-Lift Deep-Well Applications

One of the major performance features of Total 4 Inch 750W Deep well pump TWP57506 is its maximum head of 80m. Maximum head refers to the highest vertical lifting capability specified for the pump under the relevant operating conditions. With an 80m maximum head, the pump is well suited to applications where water needs to be lifted through a considerable vertical distance. This makes it particularly useful for deep-well installations where the water source is located significantly below the point where the water will be delivered. The actual working head and flow will depend on the complete system, including well depth, pipe length, elevation, fittings, and other flow restrictions.

• 6.7m³/h Maximum Flow for Efficient Water Transfer

The Total 4 Inch 750W Deep well pump TWP57506 has a maximum flow rate of 6.7m³/h, providing useful water-transfer capacity for a variety of applications. This specification represents the maximum stated volume of water that the pump can move per hour under appropriate conditions. A flow capacity of 6.7m³/h makes the pump suitable for applications where regular water transfer is required, including moving water from a well to a storage tank or distribution system. The actual flow achieved during operation may vary depending on the pumping head, pipework, elevation, and overall resistance within the water system.

• 1-1/4″ Pipe Diameter for a Compatible Water Delivery System

The pump uses a 1-1/4″ pipe diameter, providing a defined connection size for the water delivery system. Correct pipe sizing is important because the pipework needs to be compatible with the pump and suitable for transporting the required volume of water. The 1-1/4″ specification provides a clear reference when selecting compatible pipes, fittings, valves, and other components for installation. A properly designed delivery line can help ensure that the pump operates effectively while minimizing unnecessary restrictions in the water flow. The entire pipe system should be selected according to the required distance, elevation, and intended application.

• 4-Inch Well Pump Body for Suitable Deep-Well Installation

Total 4 Inch 750W Deep well pump TWP57506 features a 4-inch well pump body designed for installation in compatible deep wells. The body diameter is an important consideration when choosing a submersible pump because the pump needs to fit appropriately inside the available well or borehole. A suitable installation should provide enough clearance for the pump to be positioned correctly while allowing it to operate as intended. Before installation, users should confirm that the well dimensions and conditions are suitable for a 4-inch pump body.

• 10-Stage Impeller for Enhanced Water Lifting Capability

The pump is equipped with a 10-stage impeller system, which is an important part of its high-head pumping configuration. A multi-stage pump uses successive impeller stages to build pressure as water passes through the pumping mechanism. The 10-stage arrangement contributes to the pump’s specified maximum head of 80m, making the unit suitable for applications where substantial vertical lifting is required. This configuration is particularly useful in deep-well installations where water needs to travel from an underground source to a higher delivery point. The multi-stage design therefore complements the pump’s 1.0HP motor and high maximum head specification.

• Copper Wire Motor for Reliable Motor Construction

Total 4 Inch 750W Deep well pump TWP57506 is fitted with a copper wire motor designed to provide the driving power required by the pumping system. Copper is commonly used for electric motor windings because of its good electrical conductivity and ability to carry current effectively. The copper wire motor works together with the 750W rated power and 10-stage impeller system to provide the pump’s specified pumping performance. Proper electrical installation, appropriate operating conditions, and regular maintenance can help support dependable pump operation over time.

• Brass Outlet for a Strong and Practical Connection

The pump features a brass outlet that provides a practical connection point for the water delivery pipe. Brass is widely used for plumbing and water-system components because of its useful mechanical properties and suitability for many water connection applications. The brass outlet allows the pump to be connected to the specified 1-1/4″ pipe system when the appropriate compatible fittings are used. During installation, the connection should be properly secured and sealed to minimize leakage and maintain an efficient water-transfer path.

• Deep Well Submersible Pump for Efficient Water Extraction and Transfer

As a deep well submersible pump, Total 4 Inch 750W Deep well pump TWP57506 is designed to operate within a suitable water source, making it well suited to underground water extraction. The submersible configuration allows the pump to be positioned down inside a compatible well, closer to the water being extracted. This makes it practical for deep-well applications where water needs to be lifted from below ground and transferred to a higher point. Its combination of 750W power, 80m maximum head, 6.7m³/h maximum flow, and 10-stage impeller provides a useful configuration for demanding water-lifting requirements.

• Suitable for Deep Wells and Underground Water Extraction

Deep wells require equipment capable of transferring water from considerable depths. Total 4 Inch 750W Deep well pump TWP57506 is designed for compatible deep-well installations, with its 4-inch pump body and 80m maximum head providing useful characteristics for this type of application. The pump can extract water from a suitable underground source and transfer it through the connected pipework toward a storage tank, household system, irrigation network, or other appropriate destination. Its 10-stage impeller system further supports its ability to develop the pressure needed for high-lift water transfer.

• Ideal for Domestic Water Supply Applications

For suitable domestic installations, Total 4 Inch 750W Deep well pump TWP57506 can be used to transfer underground water toward a household water system or elevated storage tank. Its 6.7m³/h maximum flow provides useful water movement capacity, while the 80m maximum head supports installations where the water has to be lifted through a significant vertical distance. The pump can therefore form an important part of a properly designed domestic water supply system, particularly where water is obtained from a compatible deep well or borehole.

• Suitable for Irrigation and Agricultural Water Pumping

Reliable water availability is important in agriculture, particularly for irrigation and other farm operations. Total 4 Inch 750W Deep well pump TWP57506 can be incorporated into suitable agricultural water systems to extract underground water and transfer it to irrigation points, storage facilities, or other areas where water is required. Its 1.0HP motor, 80m maximum head, and 6.7m³/h maximum flow provide useful specifications for farms requiring dependable water movement. The pump can be particularly valuable where groundwater is an important source for agricultural water supply.

• Practical Solution for General Water Pumping and Transfer

Beyond domestic and agricultural applications, this deep-well pump can also be used for general water pumping and transfer duties where its specifications match the requirements of the system. The combination of a 750W motor, 10-stage impeller, 80m maximum head, and 6.7m³/h maximum flow provides versatility for a range of suitable water-transfer applications. The defined 1-1/4″ pipe diameter also makes it easier to select compatible pipework and fittings. Before installation, users should assess the required flow, total lifting height, water source depth, and pipework arrangement to ensure the pump is appropriately matched to the intended task.

• Efficient Combination of Power, Head and Multi-Stage Pumping

The overall specification of Total 4 Inch 750W Deep well pump TWP57506 provides a useful combination of motor power and high-lift capability. The 750W (1.0HP) copper wire motor drives a 10-stage impeller system capable of achieving a maximum head of 80m, while the maximum flow reaches 6.7m³/h. This combination makes the pump suitable for installations where both reliable water transfer and significant vertical lifting are required. The 4-inch body further establishes its intended deep-well configuration, while the brass outlet provides a practical connection point for the water delivery system.

• A Dependable Deep-Well Water Pump for Domestic, Agricultural and General Applications

Total 4 Inch 750W Deep well pump TWP57506 brings together a 220–240V~50Hz input voltage, 750W (1.0HP) rated power, 80m maximum head, 6.7m³/h maximum flow, 1-1/4″ pipe diameter, 4-inch well pump body, 10-stage impeller, copper wire motor, and brass outlet. These specifications make it a strong option for compatible deep-well installations requiring efficient water extraction and transfer. Its high maximum head makes it especially suitable for applications involving substantial vertical water lifting, while the 6.7m³/h maximum flow provides useful transfer capacity. Whether used for domestic water supply, irrigation, agriculture, or general pumping, the pump offers a practical combination of power and performance.

Click to view more different prices