Total 4 Inch 1100W Deep well pump TWP511006

Total 4 Inch 1100W Deep well pump TWP511006 – Powerful, High-Performance and Reliable Water Pumping Solution

Total 4 Inch 1100W Deep well pump TWP511006 is a powerful submersible water pump designed to provide efficient water extraction and transfer from suitable deep wells and underground water sources. Featuring a rated power of 1100W (1.5HP), a maximum head of 112m, and a maximum flow of 6.7m³/h, this pump is designed for applications where water needs to be lifted through considerable vertical distances. Its 4-inch well pump body, 14-stage impeller system, copper wire motor, and brass outlet provide a practical combination for reliable deep-well pumping. The pump is suitable for domestic water supply, agricultural irrigation, general water transfer, and other compatible applications requiring dependable underground water extraction.

• 220–240V~50Hz Input Voltage for Convenient Electrical Operation

Total 4 Inch 1100W Deep well pump TWP511006 operates with an input voltage of 220–240V~50Hz, making it suitable for compatible electrical power systems operating within this voltage range. The specified 50Hz frequency provides a clear electrical requirement for planning the pump installation. Having a defined voltage specification helps users select an appropriate power source and compatible electrical protection for the pumping system. Before operation, the available electrical supply should be checked to ensure it corresponds with the pump’s requirements. Correct electrical installation is important for supporting safe and reliable operation of the motor.

• 1100W (1.5HP) Rated Power for Strong Pumping Capability

With a rated power of 1100W, equivalent to 1.5HP, the pump provides substantial motor power for demanding deep-well water pumping applications. The motor supplies the energy needed to operate the 14-stage impeller system and move water through the connected delivery pipe. The 1.5HP rating makes the pump suitable for applications requiring greater lifting capability than lower-powered deep-well pumps. The 1100W specification also provides an important reference when planning the electrical installation and selecting the appropriate power supply for the pump.

• 112m Maximum Head for High-Pressure Water Lifting

One of the most notable features of Total 4 Inch 1100W Deep well pump TWP511006 is its maximum head of 112m. This high maximum head rating makes the pump suitable for applications where water needs to be lifted through a substantial vertical distance. It can be particularly useful in deep-well installations where the underground water source is located far below the required delivery point. The pump’s 14-stage impeller configuration works with the 1.5HP motor to support this high lifting capability. Actual operating head and water delivery will depend on factors such as well depth, elevation, pipe length, fittings, and system resistance.

• 6.7m³/h Maximum Flow for Efficient Water Transfer

The pump has a maximum flow rate of 6.7m³/h, giving it useful capacity for transferring water from an underground source to a suitable destination. Flow rate indicates the volume of water that can be moved over a specified period, and this specification is important when determining whether the pump matches the requirements of a particular water system. A maximum flow of 6.7m³/h makes the pump suitable for a range of water-transfer applications, including filling storage tanks, supporting irrigation systems, and supplying suitable domestic water networks. Actual flow will vary depending on the operating head and resistance within the connected pipe system.

• 1-1/4″ Pipe Diameter for Compatible Water Delivery Connections

Total 4 Inch 1100W Deep well pump TWP511006 features a 1-1/4″ pipe diameter, providing a defined connection size for the water delivery system. Correct pipe sizing is essential for establishing a compatible and efficient route for transferring water from the pump. The 1-1/4″ specification gives users a clear reference when selecting pipes, fittings, valves, and other components required for installation. The complete delivery system should be properly planned according to the required flow, pumping distance, elevation, and intended application to help achieve suitable water-transfer performance.

• 4-Inch Well Pump Body for Compatible Deep-Well Installation

The pump features a 4-inch well pump body designed for use in suitable deep-well installations. The physical size of a submersible pump is an important consideration because the pump needs to fit appropriately within the well or borehole. The 4-inch configuration provides a practical form factor for compatible well systems. Before installation, the dimensions and condition of the well should be assessed to ensure there is sufficient space for the pump and that it can be lowered and positioned correctly. Proper installation helps ensure that the pump operates under appropriate conditions.

• 14-Stage Impeller System for High-Lift Water Pumping

The Total 4 Inch 1100W Deep well pump TWP511006 uses a 14-stage impeller system to support its high maximum head capability. Multi-stage pumps use multiple impeller stages to progressively develop pressure as water passes through the pumping mechanism. The 14-stage configuration provides a strong foundation for the pump’s specified maximum head of 112m. This makes the pump particularly appropriate for deep-well applications where water must be raised over a considerable vertical distance. The multi-stage arrangement complements the 1.5HP motor to provide the pumping characteristics required for high-lift applications.

• Copper Wire Motor for Reliable Motor Construction

The pump is equipped with a copper wire motor designed to provide the driving power needed by the pumping mechanism. Copper is widely used in electric motor windings because of its good electrical conductivity and ability to effectively carry electrical current. In Total 4 Inch 1100W Deep well pump TWP511006, the copper wire motor works together with the 1100W rated power and 14-stage impeller system to deliver the specified pumping performance. Appropriate electrical protection, correct installation, and operation within the specified conditions are important for maintaining dependable motor performance.

• Brass Outlet for a Practical and Durable Connection

Total 4 Inch 1100W Deep well pump TWP511006 is fitted with a brass outlet, providing a solid connection point for the water delivery system. Brass is commonly used in plumbing and water-system components because of its useful mechanical properties and suitability for many connection applications. The brass outlet provides a practical interface for connecting compatible 1-1/4″ pipework and fittings. During installation, the connection should be properly secured and sealed to reduce the possibility of leaks and maintain an efficient route for water transfer.

• Deep Well Submersible Pump for Efficient Water Extraction and Transfer

As a deep well submersible pump, Total 4 Inch 1100W Deep well pump TWP511006 is designed to operate within a compatible water source and extract water from underground. Its submersible design allows the pump to be positioned inside the well, close to the available water, rather than relying on a surface-mounted unit to draw water from a significant depth. This configuration makes it particularly useful for deep-well water extraction. The combination of its 1.5HP motor, 112m maximum head, 6.7m³/h maximum flow, and 14-stage impeller system provides a strong configuration for efficient water lifting and transfer.

• Suitable for Deep Wells and Underground Water Sources

Deep wells require suitable pumping equipment capable of transferring water from underground to a useful delivery point. Total 4 Inch 1100W Deep well pump TWP511006 is designed around this requirement, featuring a 4-inch pump body and high 112m maximum head. The pump can be installed in a compatible deep well to extract groundwater and transfer it through the connected pipe system. Its high-head capability is particularly valuable where the water source is located at a substantial depth or where the delivery point is significantly higher than the pump installation position.

• Ideal for Domestic Water Supply Applications

For suitable domestic water systems, Total 4 Inch 1100W Deep well pump TWP511006 can provide a reliable means of moving underground water toward a household supply or storage tank. Its 6.7m³/h maximum flow provides useful water-transfer capacity, while the 112m maximum head allows it to support systems requiring considerable vertical lifting. The pump can therefore form part of a properly designed domestic water supply arrangement using a compatible well or borehole. The actual water output will depend on the installation conditions and the resistance of the complete delivery system.

• Suitable for Irrigation and Agricultural Applications

Agricultural activities often depend on dependable water availability for irrigation, crop production, livestock support, and other farm requirements. Total 4 Inch 1100W Deep well pump TWP511006 can be incorporated into suitable agricultural water systems to extract groundwater and transfer it to irrigation areas, storage tanks, or other locations where water is needed. Its 1.5HP motor and 112m maximum head make it suitable for installations requiring substantial water lifting. The 6.7m³/h maximum flow also provides useful water-transfer capacity for appropriately designed irrigation systems.

• Practical Choice for General Water Pumping and Transfer

Beyond domestic and agricultural applications, this deep-well pump can be used for general water pumping and transfer duties where its specifications match the requirements of the system. Its combination of 1100W power, 14-stage pumping, 112m maximum head, and 6.7m³/h maximum flow provides useful versatility for compatible water systems. Whether transferring water to a tank, supporting an irrigation network, or moving groundwater through a distribution system, the pump provides a practical solution when properly matched to the application.

• Balanced Combination of High Power and Multi-Stage Performance

The specifications of Total 4 Inch 1100W Deep well pump TWP511006 provide a strong balance between motor power, water flow, and high lifting capability. The 1100W (1.5HP) copper wire motor drives a 14-stage impeller arrangement capable of achieving a maximum head of 112m. At the same time, the maximum flow of 6.7m³/h provides useful water-transfer capacity. The 4-inch body and 1-1/4″ pipe diameter further establish a clear configuration for compatible deep-well installations. This combination makes the pump suitable for users looking for high-lift water pumping capability from an underground source.

• A Powerful and Dependable Deep-Well Pumping Solution for Multiple Applications

Total 4 Inch 1100W Deep well pump TWP511006 combines a 220–240V~50Hz input voltage, 1100W (1.5HP) rated power, 112m maximum head, 6.7m³/h maximum flow, 1-1/4″ pipe diameter, 4-inch well pump body, 14-stage impeller, copper wire motor, and brass outlet into a practical deep-well pumping solution. Its high 112m maximum head makes it particularly suitable for applications involving substantial vertical water lifting, while its 6.7m³/h maximum flow provides effective transfer capacity for suitable systems. The pump can serve domestic, agricultural, irrigation, and general water-pumping requirements where the installation conditions match its specifications. With proper sizing, installation, electrical protection, and maintenance, it offers a dependable way to extract and transfer groundwater from compatible deep wells.

Click to view more different prices