Total 4 Inch 1500W Deep well pump TWP515006

Total 4 Inch 1500W Deep well pump TWP515006 – Powerful, High-Capacity and Reliable Water Pumping Solution

Total 4 Inch 1500W Deep well pump TWP515006 is a powerful deep-well submersible pump designed for efficient water extraction and transfer from suitable underground water sources. With a rated power of 1500W (2.0HP), a maximum head of 135m, and a maximum flow of 6.7m³/h, this pump is built for applications requiring substantial vertical water lifting. Its 4-inch well pump body, 18-stage impeller system, copper wire motor, and brass outlet provide a practical configuration for demanding water pumping requirements. The pump is suitable for deep wells, domestic water supply, irrigation, agriculture, and general water transfer applications where its specifications match the requirements of the installation.

• 220–240V~50Hz Input Voltage for Convenient Electrical Operation

Total 4 Inch 1500W Deep well pump TWP515006 operates with an input voltage of 220–240V~50Hz, providing a clearly defined electrical requirement for compatible installations. This voltage range is suitable for power systems operating within the specified electrical parameters. The 50Hz frequency further identifies the type of electrical supply required for operation. Having a clearly stated input voltage makes it easier to plan the electrical installation and select a suitable power source. Before use, the available electrical supply should be confirmed to ensure it corresponds with the pump’s specifications, while appropriate electrical protection should be incorporated into the installation.

• 1500W (2.0HP) Rated Power for Strong Pumping Performance

With a rated power of 1500W, equivalent to 2.0HP, Total 4 Inch 1500W Deep well pump TWP515006 provides substantial motor power for deep-well pumping applications. The motor supplies the energy needed to drive the pump’s 18-stage impeller system and move water through the delivery pipe. A 2.0HP rating makes this model suitable for applications where a stronger pumping system is required to achieve considerable water-lifting performance. The 1500W specification is also useful when determining electrical requirements and ensuring that the pump is matched with an appropriate power supply.

• 135m Maximum Head for High-Lift Water Pumping

A major performance feature of Total 4 Inch 1500W Deep well pump TWP515006 is its maximum head of 135m. Maximum head represents the maximum vertical lifting capability specified for the pump under applicable conditions. With a 135m maximum head, the pump is designed for demanding applications where water needs to be raised through a considerable vertical distance. This makes it particularly suitable for deep wells and water systems where the delivery point is significantly higher than the underground water source. Actual operating performance will depend on the complete installation, including pumping depth, elevation, pipe length, fittings, and system resistance.

• 6.7m³/h Maximum Flow for Effective Water Transfer

The pump has a maximum flow of 6.7m³/h, providing useful capacity for transferring water from a suitable underground source to a storage or distribution system. Flow rate indicates the volume of water the pump can move over a given period, making it an important specification when selecting equipment for a particular water application. A maximum flow of 6.7m³/h can support domestic water systems, irrigation arrangements, agricultural water transfer, and other suitable applications. The actual flow achieved during operation will depend on the operating head and the resistance created by the connected pipework and other components.

• 1-1/4″ Pipe Diameter for Compatible Water Delivery Connections

Total 4 Inch 1500W Deep well pump TWP515006 uses a 1-1/4″ pipe diameter, providing a defined size for the water delivery connection. Selecting compatible pipework is essential for establishing an effective water-transfer system and ensuring that the pump is correctly integrated into the installation. The 1-1/4″ specification provides a useful reference when choosing pipes, fittings, valves, and related connection components. The complete delivery line should be properly designed according to the required flow, vertical lift, horizontal distance, and application requirements.

• 4-Inch Well Pump Body for Suitable Deep-Well Installation

The pump features a 4-inch well pump body, making it suitable for compatible deep-well installations that can accommodate its physical dimensions. Pump body size is an important consideration when installing a submersible pump because sufficient clearance is required inside the well or borehole. The 4-inch configuration provides a practical size for suitable deep-well applications. Before installation, the well should be assessed to ensure that its internal dimensions and conditions are appropriate for the pump and that the unit can be lowered and positioned correctly.

• 18-Stage Impeller System for High-Lift Performance

One of the important features of Total 4 Inch 1500W Deep well pump TWP515006 is its 18-stage impeller configuration. A multi-stage pump uses successive impeller stages to progressively develop pressure as water passes through the pumping mechanism. The 18-stage design supports the pump’s high maximum head of 135m, making it particularly appropriate for installations requiring significant vertical water lifting. This configuration works together with the 2.0HP motor to provide the pumping characteristics required for demanding deep-well applications. The multiple stages help establish the pressure necessary to move water through a system involving substantial elevation.

• Copper Wire Motor for Reliable Motor Construction

Total 4 Inch 1500W Deep well pump TWP515006 is equipped with a copper wire motor that provides the driving force for the pumping mechanism. Copper is commonly used in electric motor windings because of its good electrical conductivity and ability to carry electrical current effectively. The copper wire motor works with the 1500W rated power to drive the 18-stage impeller system. Proper installation, electrical protection, and operation within suitable conditions are important for maintaining reliable motor performance and supporting the overall operation of the pump.

• Brass Outlet for a Practical and Durable Water Connection

The pump is fitted with a brass outlet, providing a practical connection point for the water delivery pipe. Brass is commonly used in plumbing and water-system fittings because of its useful mechanical properties and suitability for many water connection applications. The brass outlet provides a solid interface for connecting compatible 1-1/4″ pipework and fittings. Proper connection and sealing are important during installation to reduce the possibility of leakage and ensure that water can move efficiently from the pump into the delivery system.

• Deep Well Submersible Pump for Efficient Water Extraction and Transfer

As a deep well submersible pump, Total 4 Inch 1500W Deep well pump TWP515006 is designed to operate within a compatible underground water source. Its submersible configuration allows the pump to be positioned inside the well, close to the water being extracted. This makes it particularly suitable for deep-well applications where water needs to be raised from below ground and transferred toward a higher destination. Its combination of 2.0HP power, 135m maximum head, 6.7m³/h maximum flow, and 18-stage impeller system provides a strong configuration for high-lift water extraction and transfer.

• Suitable for Deep Wells and Underground Water Extraction

Deep wells require pumping equipment capable of transferring water from significant depths to a useful delivery point. Total 4 Inch 1500W Deep well pump TWP515006 is designed for compatible deep-well installations, with its 4-inch body and 135m maximum head providing useful characteristics for high-lift applications. The pump can extract water from a suitable underground source and transfer it through connected pipework. Its high-head design makes it appropriate for installations where the vertical distance between the water source and the delivery point is considerable.

• Ideal for Domestic Water Supply Applications

For suitable domestic water systems, Total 4 Inch 1500W Deep well pump TWP515006 can provide an effective means of transferring groundwater toward a household water supply, storage tank, or other appropriate destination. Its 6.7m³/h maximum flow provides useful water-transfer capacity, while its 135m maximum head allows it to support installations involving substantial vertical lifting. This makes the pump a practical option for properties that depend on suitable deep wells or boreholes for water supply. The actual performance will depend on the depth of the water source and the design of the complete delivery system.

• Suitable for Irrigation and Agricultural Water Transfer

Reliable water availability is essential for many agricultural operations, particularly irrigation and crop production. Total 4 Inch 1500W Deep well pump TWP515006 can be incorporated into a suitable agricultural water system to extract groundwater and transfer it to irrigation areas, storage tanks, or other locations where water is required. Its 2.0HP motor and 135m maximum head provide useful characteristics for agricultural installations involving considerable water lifting. The maximum flow of 6.7m³/h also provides practical transfer capacity for appropriately designed irrigation systems.

• Practical Choice for General Water Pumping Applications

Beyond domestic and agricultural applications, this pump can be used for general water pumping and transfer duties where its specifications are appropriate for the installation. The combination of 1500W rated power, 18-stage impeller design, 135m maximum head, and 6.7m³/h maximum flow gives the pump a useful configuration for demanding water-transfer applications. It can be incorporated into suitable systems for moving groundwater to storage or distribution points. Users should consider the required flow rate, total dynamic head, pipe arrangement, and water source conditions when selecting the pump for a particular task.

• Strong Combination of Power, High Head and Multi-Stage Design

The specifications of Total 4 Inch 1500W Deep well pump TWP515006 provide a strong combination of motor power and high-lift pumping capability. Its 1500W (2.0HP) copper wire motor drives an 18-stage impeller system designed to achieve a maximum head of 135m. At the same time, the pump provides a maximum flow of 6.7m³/h for suitable water-transfer applications. The 4-inch body, 1-1/4″ pipe diameter, and brass outlet complete a practical configuration for compatible deep-well installations. This combination makes the pump particularly useful where reliable water lifting over considerable vertical distances is required.

• A Powerful and Dependable Deep-Well Pumping Solution for Domestic, Agricultural and General Use

Total 4 Inch 1500W Deep well pump TWP515006 brings together a 220–240V~50Hz input voltage, 1500W (2.0HP) rated power, 135m maximum head, 6.7m³/h maximum flow, 1-1/4″ pipe diameter, 4-inch well pump body, 18-stage impeller, copper wire motor, and brass outlet. These features create a powerful configuration for suitable deep-well water extraction and transfer applications. Its high 135m maximum head makes it particularly suitable for demanding vertical lifting requirements, while the 6.7m³/h maximum flow provides useful water-transfer capacity. The pump is well suited to compatible deep wells, domestic water supply systems, irrigation installations, agricultural water transfer, and general pumping duties.

Click to view more different prices